Sharpcraft Damascus Butcher Knife Set 4 Piece

The Butcher Knife Set is the traditional butcher’s four, made the way butchers have always wanted them. The 10-inch cimeter slices primals in long, smooth strokes, the 8-inch breaking knife separates cuts, the 6-inch boning knife works close to the bone, and the 6-inch cleaver chops through joints. All four are hand-folded Damascus with camel bone handles and nickel-silver bolsters, made for the block and the cold room.

WHAT’S INCLUDED

– 1x 10-inch cimeter
– 1x 8-inch breaking knife
– 1x 6-inch boning knife
– 1x 6-inch cleaver
– 1x Hand-stitched dark brown leather roll bag
– Sharpcraft care card

MATERIALS

Every blade in this set is hand-folded Damascus steel, each pattern unique — no two blades, and no two sets, are ever exactly alike. The steel is hardened to 58–60 HRC, so the edge stays sharp through long prep sessions and comes back keenly with a hone. Every knife is full tang: the steel runs the whole length of the handle, pinned in place, so the knife is balanced and will not loosen with use. The handles are camel bone, nickel-silver bolster, shaped and polished by hand to sit comfortably in a working grip. Each blade carries the gold-script Sharpcraft etching. The set rolls up in a hand-stitched dark brown leather roll bag that protects the edges and keeps the set together, at home or on the road.

HOW IT’S MADE

1. Layers of steel are stacked and forge-welded together in the forge, then folded over and over until the billet holds 67 layers.
2. The layered billet is forged to shape — each blade profile is hammered out by hand, not stamped.
3. The bevels are ground by hand, and the edge is thinned and shaped for its job, whether that is chopping, push-cutting or slicing.
4. Each blade is heat-treated and tempered to 58–60 HRC, hard enough to hold an edge and tough enough for daily work.
5. The blade is polished to bring out the wavy Damascus pattern — the folding made it, the polish reveals it.
6. The handle scales are fitted to the full tang, shaped, pinned and polished by hand.
7. Each knife is honed, tested on paper and board, and checked edge to tip before it leaves the workshop.
8. The leather roll bag is cut, stitched and finished by hand, and the set is rolled up ready to use.

SPECIFICATIONS

| Specification | Detail |
| — | — |
| Pieces | 4 knives |
| 10-inch cimeter | approx 15 inches overall / 10-inch blade |
| 8-inch breaking knife | approx 13 inches overall / 8-inch blade |
| 6-inch boning knife | approx 11 inches overall / 6-inch blade |
| 6-inch cleaver | approx 11 inches overall / 6-inch blade |
| Total weight | approx 1010 g (35.6 oz) |
| Steel / layers | Hand-folded Damascus steel, 67 layers |
| Hardness | 58–60 HRC |
| Tang | Full tang |
| Handle material | Camel bone, nickel-silver bolster |
| Included | Hand-stitched dark brown leather roll bag, Sharpcraft care card |

All lengths and weights are approximate design targets. Each knife is handcrafted, so the Damascus pattern and handle grain will vary slightly from knife to knife — that is the mark of a handmade piece, not a flaw.

WHO IT’S FOR

Built for butchers, farm shops, hunters and anyone who breaks down whole cuts at home — for the person who buys a side of beef or a deer and does the work themselves. It is a working set, not a display set, and it is ground and balanced for long sessions at the block.

CARE

Hand wash with warm water and mild soap, dry immediately, and oil the blades and handles lightly from time to time. Do not put in the dishwasher. Store rolled in the leather roll bag. Hone regularly and sharpen on a whetstone when the edge needs it.